RENIA FORTE 10 KGS.

High-Power-Cement
Technical Data Sheet 120.000-0814
B ASIS :
Polychloroprene cement for bonding many materials around shoes. Free of toluene and MEK.
M ATERIALS :
All materials used for repairing or producing shoes like leather, rubber, EVA, TR, felt, cork, etc. can be
bonded, but not on plastified PVC. For bonding PVC use Renia - Syntic-TOTAL or Renia-Colle de
Cologne All Purpose Cement.
I NSTRUCTIONS :
Grind the materials and coat them with Renia - forte until you can see a layer of cement. Leather and
other porous materials may have to be coated twice. PE, PP: Contact with an open gas flame. TR
(Thermoplastic Rubber): Clean with acetone. Certain TR types need to be halogenated with Rehagol
and bonded with Syntic-TOTAL or Colle de Cologne. PUR (Polyurethane): After grinding, press the
material with absorbent paper to remove the water. Then coat it with Renia – Primer for PUR. Apply
the adhesive without delay.
P OT -L IFE :
Cannot be mixed with hardener.
O PEN ASSEMBLY T IME :
Depends on the material: 5-20 minutes (TR 3-10 minutes). Renia - forte can be dried with an infra red
lamp: IR-Lamp 80 °C: 3 minutes, shock-activator: 3 seconds.
P RESSURE :
1 - 5 bar depending on the material
1 bar minimum time 60 seconds, 3 bar minimum time 15 seconds
H IGHLIGHTS :
Due to the fast crystallisation and the extraordinarily high initial bonding strength of Renia-forte, it is
possible to handle the bonded pieces immediately. The heat resistance is high enough to trim or buffer
the sole or heel. The bonding strength increases continuously during the first day. For normal use it is
not necessary to add any hardener, because the resistance against heat and other chemical
influences is already extremely high for a one-component system.
S HELF -L IFE :
Minimum 12 months at 20 °C
T HINNER :
RENIA - Schnellkeber-Verdünner (thinner); no acetone!
C LEANING :
Clean equipment (glue-container, brush, etc.) with RENIA-Schnellkleber-Verdünner (thinner) or
acetone.
L ABELLING :
VbF : AI, Flashpoint less than 21 °C, highly flammable
GGVSEB : class 3 Packing Group : III
IMDG : 3 UN : 1133
EmS : F-E, S-D