If you are a footwear professional, register or log in to find out our special conditions
PRIMER-PU TRANSPARENT 1 LT (TOLUENO FREE)
€15.83
Tax included
Primer on solvent base specially designed for the footwear industry.
Suitable for use as a primer on loose and very absorbent skins, in order
to penetrate and reinforce the superficial layers of the skin, and
especially in high-fat skins in the manufacture of high-demand footwear (
Sports, military, mountain ...). It also has a high resistance to heat,
hydrolysis and plasticizers.
01222
APPLICATION
To this Primer can be added a 5% REFORZANTE in order to improve its adhesion properties, crystallization rate, resistance to temperature and to fats and plasticizers, and to aging etc.
Due to constant variations in quality and / or nature of the materials used in the footwear industry, the use of this Primer in a two component system (PU + REFORZANTE) is advisable whenever possible , Since the adhesive and mechanical properties of the adhesive itself are considerably increased.
For more information and precautions for use, consult the Material Safety Data Sheet.
.
PREPARATION OF MATERIALS
As a general rule, we must remove any dirt, grease or impurity by physical or chemical treatment of the surfaces to be bonded.
.
PACKAGING INFORMATION
1 litre metallic cans and 4 litres metallic cans.
.
STORAGE
Store between 5 to 30ºC in original packaging. Keep container tightly closed when not in use. Shelf life approximately 12 months. It is important to preserve it at temperatures below 4 ° C, as it will tend to gel.PRIMER-PU TRANSPARENT 1 LT (TOLUENO FREE)
01222
Specific References
On Top